Our renovation journey began exactly three weeks ago… Here is the odyssey of our journey.
It all began on a Sunday morning when we found out that there was a water leak in our guest house. I exchanged the broken valve under the kitchen sink, but the damage had already been done… The water had leaked under the linoleum and had soaked the 5 layers yes 5 layers of flooring. It was also brought to our attention that the washing machine was not working so I removed it from the bathroom and found that it was broken beyond repair and must also have been leaking water over an extended period in the bathroom. I started to rip away soaking wet drywall from where the washing machine had sat and found a ton of mold behind the walls. Thats when I realized we were in it for the long haul. When everything was said and done we had ripped out everything except the kitchen cabinets.
Look at all the mold! We found it behind all the walls in the bathroom!
I had to rip part of the ceiling out to instal a fan for the bathroom.
We replaced the light in the kitchen as well, but I do not have a picture of it right now. It looks almost identical to the one in the bathroom.
Insulating and adding styrofoam panelling.
Yay drywalling! Quick tip; always make your second coat of mud bigger than the first coat. If a third coat is needed it is easier to put a coat of primer, and then add another coat of mud. If you happen to sand away too much of the second coat and get to the first coat, your finish will be uneven since the different layers will erode at different rates. Hence the need for making the second coat cover all of the first coat.
We put some styrofoam down on the floor for some added insulation.
Sanding =( … for all of you who have done it you know what I mean.
So the night before we were going to put in the linoleum I began to think of the best, and easiest way to cut out the linoleum, and not have to stitch it together.
Its always hard to try to line up the patterns by all the different seams. So I was thinking that there had to be a way to cut it out all in one piece.
I knew that the easiest was to probably find some kind of material that was easy to work with that we could use to create a pattern.
So we came up with some black plastic that we use for insulating our hives. We laid it out in the kitchen and bathroom, and simply used tape if we cut a bit to much of. It was really easy to work with, and when we were all done we simply rolled it up and took it to our house and rolled out the pattern on the linoleum. It was brilliant! We simply had to unroll the pre cut linoleum, and what do you know it fit perfect! No seams! Yay!
So there you have it! We still need to finish a couple trims around the windows as you can see they are missing in this picture.
Casualties on the job;
-My elbow (I fell of a chair and knocked my elbow into a screw which went right down to the bone)
-Allergies ( Found out that I must be allergic to house cats or something to that effect) or (maybe to unwanted renovations =P )
This renovation as bad as it was, is nothing compared to what awaits us in the attic!
47 years of accumulated bat droppings need cleaned out.
Update will follow...




















Wow, this looks amazing, great job!!!!
ReplyDeleteEcht gelungene Arbeit! Sieht ja super aus! In dem Haus haben Natalie und ich ja auch mal kurz gewohnt!
ReplyDelete